1. Never allow the data line (yellow-green line) to contact the power supply, otherwise it will cause irreversible damage to the product. Please provide insulation protection if necessary;
2. Use four screws to fix the sensor during installation to avoid shaking and causing data jumps;
3. During the installation process, two sides and two lines should be strictly guaranteed to help improve the accuracy of the data;
4. Refer to the product manual for wiring, and it is forbidden to connect to a power supply with a voltage higher than the standard value;
5. If the communication distance is long, the voltage can be appropriately increased within the product operating voltage range to reduce the voltage drop of the cable;
6. Do not remove the screws of the sensor and the nuts of the cable without permission to avoid loss of product protection.
