3 Wire Inductive Proximity Sensor

1. Long-distance detection
The detection distance can reach 5mm.
It can detect even if the position of the detected object is slightly deviated.
2. IP65 protection structure
IP65 protection structure is realized, which is oil-proof.
3. Bright and clear indicator light.
The visibility of the working status indicator light is greatly improved.
4. Low price
It meets the demand for low cost and is suitable for users who use a large number of inductive proximity switch.

• Complete range of products, suitable for various occasions
• Fast response speed, high-precision detection
• Customized appearance, normally open, and normally closed integrated design
• Waterproof and oil-proof, high sensitivity, wide application
• Sturdy and reliable, stable and durable, long life

(1) Do not use in the following places:
a. Outdoors (such as places in direct contact with direct sunlight, rain, snow, water drops, etc.);
b. Chemicals, especially in solvents and acidic steam environments;
c. Places with corrosive gases;
(2) When used near mobile phones, transceivers, etc., the 3 Wire Inductive Proximity Sensor may malfunction sometimes, so please be very careful!
(3) When mixed with high-voltage wires and power lines in the same wiring duct or trough, it may cause malfunction or damage due to induction. Please separate or wire separately.
(4) About cleaning work
Solvent cleaning agents will cause the surface of the product to melt, so please do not use them.
(5) Fixing: Please set the tightening torque of the fixing screw to no more than 0.59N.m
(6) Influence of the surrounding metal:
When there is metal around, it will be affected and cause poor return, etc.; even if there is no poor return, the detection distance will change due to the influence of metal around and temperature changes. Therefore, please pay attention to the minimum distance shown in the table below. The actual distance must be greater than this minimum distance.

Q： How do you select inductive proximity sensor?

1. According to the installation requirements, select the shape and detection distance reasonably.

2. According to the power supply, reasonably select the working voltage.

3. According to the actual load, select a sensor working current reasonably.

4. Select the wiring method.

Q： What issues should be paid attention to when installing 3 Wire Inductive Proximity Sensor?

Inductive proximity switches are also called non-contact travel switches. They can complete travel control and limit protection, or they are non-contact detection devices used to detect part size and speed measurement. They can also be used for variable frequency counters, variable frequency pulse generators, liquid level control, and automatic connection processing procedures. Inductive proximity switches have the characteristics of reliable operation, long life, low power consumption, high complex positioning accuracy, high operating frequency, and adaptability to harsh working environments.

When installing inductive switch sensor on metal, space should be left to avoid the switch being interfered with by other metals other than the object being detected, and causing misoperation. The metal parallel to the sensing surface should be three times the detection distance from the sensing surface, and the metal close to the switch axis should be outside the cylinder, with the center close to the switch axis and the diameter close to three times the switch diameter.

Install two or more inductive prox sensor at the same time to prevent any interference between the two. When the distance between the two induction switches in the axial direction of the surface is greater than 5 times, the distance between the detection distance and the outer cylinder should be greater than 5 times the length of the proximity switch diameter during installation. If it is a switch, the diameter size should be calculated based on the diameter of the larger proximity switch.

Hot Tags: 3 wire inductive proximity sensor, China 3 wire inductive proximity sensor manufacturers, suppliers, factory, photoelectric sensor for counting, Proximity Switch Kit, flush proximity sensor, M18 Retroreflective sensor, long range laser distance sensor, inductive linear transducer